|
August 2006 Update Patch for Cal/OSHA Products Dear Customer: You have been directed here to perform a software patch on our August 2006 Regsoft Update for Cal/OSHA products. Note: do not use use this patch if your Regsoft product does not have Cal/OSHA regulations installed. We have discovered that some of our customers are having a problem viewing the Construction Safety Orders--Subchapter 4. We also added to this patch 2 additional links-California Regulation Auxiliary Links that will provide you with new, helpful information. We're sorry for your troubles, the good news is that we have a quick fix that should get you up and running in a few minutes. Please read the following instructions carefully. Note: you may want to print this page to assist you in this process. Instructions: 1. Close your Regsoft Program that contains Cal/OSHA regulations 2. Click the "Get Patch" link below. 3. Download patch to your Desktop or other folder that you can find easily by clicking the "Save" button. Note: this patch is approximately 27.9 mb in size, so you will probably need a high speed internet connection. Note: if you so desire, you can use the "Run" command without downloading directly into a folder. As an alternative, call us and we'll mail you a CD with the patch installed on it. Our toll-free number is: (800) 664-8401. Our office hours are 8:00-5:00 CDT Monday-Friday. 4. Go to the location where the patch was downloaded. Double-click the file--"Patch_Calosha.exe". 5. When the "WinZip Self-Extractor - Patch_Calosha.exe" pop-up window appears, click the "Unzip" button on the top right of the window. 6. Wait until the patch program completes its install, when it does, you will see a small window appear that says "164 files unzipped successfully". 7. Your patch is complete, open your Regsoft program and best wishes in your compliance efforts! Note: if your Internet connection or firewall will not allow you to download an executable (exe) file, call us at (800) 664-8401 and we'll be pleased to mail you a CD. |